In this article
- What cabinet refacing is, and what it is not
- Cabinet refacing cost: typical numbers for 2026
- Cabinet refacing cost per door and per linear foot
- Refacing vs replacing: cost and when each one wins
- What changes the price of cabinet refacing
- Bathroom cabinet refacing
- DIY cabinet refacing: what you save and where it goes wrong
- Before and after: what to expect, and how to judge photos
- How to pay for a cabinet project
- Questions to ask the refacing or replacement contractor
- Questions to ask every lender
What cabinet refacing is, and what it is not
Cabinet refacing is a partial replacement. The cabinet boxes (the frames that hold the shelves and drawers) stay where they are. A refacing company covers the visible frame surfaces with new veneer, laminate or thermofoil, replaces the doors and drawer fronts with new ones, and fits new hinges and hardware. The result looks like a new kitchen without the demolition, the plumbing and electrical disturbance, or the loss of the use of your kitchen for weeks.
Three things it is easy to confuse it with:
- Painting or refinishing keeps the original doors and changes only the colour or finish. It is cheaper, but it can't change the door style.
- Refacing cabinet doors only (replacing just the doors and drawer fronts, sometimes called door replacement) leaves the frames as they are. It is the cheapest route when the frames are in good condition and match well enough.
- Replacing means pulling out the old cabinets and installing new boxes, which is the only way to change the layout, add storage inside the boxes or fix damaged frames.
Refacing therefore works best when you like the layout, the boxes are sound and you mainly want a new look. It does not fix a bad layout, sagging shelves or water-damaged bases.
Cabinet refacing cost: typical numbers for 2026
Published cost guides disagree more than you'd expect, because they define the job differently. One national guide puts the average at about $2,100 with a range of $900 to $6,000, a figure that fits a small kitchen or a door-only job. Another puts a full refacing of an average 100 to 200 square foot kitchen at $5,000 to $13,000, with small kitchens at $4,000 to $10,000 and large ones at $9,000 to $22,000 or more. Both are reporting real quotes; the gap is mostly scope (doors only, or doors plus frames and drawer fronts) and material.
| Job | Typical cost | Notes |
|---|---|---|
| Small kitchen or door-only job | $900 to $6,000 | Averages about $2,100 in one national guide |
| Average kitchen (100 to 200 sq ft), full refacing | $5,000 to $13,000 | Doors, drawer fronts, frame veneer and hardware |
| Large kitchen or solid wood | $9,000 to $22,000+ | Solid wood and many cabinets push the total up |
| Per door, installed | About $220 | Average from one guide; varies by size and style |
| Laminate or thermofoil | $80 to $125 per linear foot | The budget finish; roughly $2,000 to $4,000 total |
| Wood veneer | $100 to $250 per linear foot | Roughly $2,500 to $8,000 total |
| Solid wood | $200 to $500 per linear foot | Roughly $5,000 to $16,000 total |
Ranges from the Angi and HomeGuide cost guides linked in the sources below; real quotes depend on region, number of cabinets, material and finish. Get at least three written quotes on the same scope.
If your quote is far from these numbers, ask what is included before you decide it is high or low. A door-only job quoted against a full refacing will look cheap for a reason.
Cabinet refacing cost per door and per linear foot
Two units make quotes easier to compare. Per door (about $220 on average, installed, in one guide) works well for small jobs and for bathrooms, where you might have six doors and a few drawer fronts. Per linear foot of cabinets ($80 to $125 for laminate up to $200 to $500 for solid wood) works better for whole kitchens, because it scales with how much cabinet there is rather than how many doors it is divided into.
To use them, count the doors and drawer fronts, then measure the length of the cabinet runs along the walls (upper and lower, measured separately). Our free worksheet at the end of this guide has a counter for both. Then multiply by the quote's unit price and check it matches the total. If it doesn't, ask what else is in the number: new hardware, a replacement end panel, crown moulding or a new toe-kick are the usual extras.
Refacing vs replacing: cost and when each one wins
| Reface | Replace | |
|---|---|---|
| Typical cost | About $2,100 average; $900 to $6,000 in one guide, $5,000 to $13,000 for an average kitchen in another | About $6,400 average; $2,000 to $30,000 overall |
| Layout | Stays the same | Can be changed completely |
| Disruption | Smaller; the kitchen stays usable for most of the job | Larger; demolition, possible plumbing and electrical work |
| Fixes damaged boxes | No | Yes |
| Best when | Boxes are sound, the layout works, the budget is tight | Boxes are damaged, you want a new layout or more storage |
Cost figures from the Angi guide linked in the sources below. The two options overlap at the low end: the cheapest replacement costs about the same as an average refacing job.
Two rules of thumb help. First, if refacing would cost more than about half of the price of replacing, replacement is usually the better value, because you'd be spending most of a new kitchen's price on cabinets you'll still have to live with. Second, cabinets in good shape that are less than about 20 years old are good refacing candidates, while cabinets with mold, water damage, crooked frames or drawers that stick are not. Refacing semi-custom or custom cabinets typically costs 30% to 50% less than replacing them, which is why high-quality boxes are the best candidates of all.
What changes the price of cabinet refacing
- Material. Laminate and thermofoil are the cheapest, wood veneer is mid-range and solid wood costs the most.
- Number of doors and drawers. Many small doors cost more than a few large ones, because each is made, finished and fitted separately.
- Door style. A flat slab door costs less than a raised-panel or glass-front door.
- Scope. Frames, drawer fronts, end panels and moulding add to the price; door-only jobs are the cheapest.
- Hardware. New hinges and pulls are often included, but upgraded soft-close hinges and designer handles are not.
- Region and company. National franchises and local specialists price differently; a large retailer's refacing service is usually quoted by a design consultant at your home.
Counters are separate. Refacing leaves the countertop alone, so if you want new counters as well, price them separately; the combination is covered in how much a kitchen remodel costs.
Bathroom cabinet refacing
The same logic applies to vanities and storage in the bathroom, at a smaller scale. A bathroom may have only a handful of doors, so pricing per door makes sense, and replacing a vanity can cost less than a kitchen replacement. If the vanity has water damage around the sink, replace it rather than reface it, because new veneer over swollen particleboard will fail. If you're updating the whole room, see how much a bathroom remodel costs and the bathroom remodel financing page.
DIY cabinet refacing: what you save and where it goes wrong
Doing it yourself saves labor, which is a large share of a professional refacing price. A DIY job uses peel-and-stick or glued veneer on the frames and ready-made replacement doors and drawer fronts, with new hinges and pulls. It takes a few days and some patience.
It goes wrong in three places. First, measuring: replacement doors are made to order, and an error of a fraction of an inch shows as uneven gaps. Second, surface preparation: veneer needs a clean, degreased, smooth surface or it lifts at the edges within months. Third, alignment: hanging dozens of doors so the reveals match is slow work, and it is where professionals earn their fee. DIY suits a small bathroom or a laundry room, where mistakes are cheap and the cabinets are visible less often. For a main kitchen, many homeowners decide professional refacing is worth the price once they count the cost of ordering doors twice.
Before and after: what to expect, and how to judge photos
A good refacing job changes the look of the room completely: new door style, new colour, new hardware, with the same footprint. The usual limits are visible if you know where to look. Interior surfaces of the boxes are rarely changed, so shelf interiors will look as they did. Door styles that need a different frame depth may not be possible. Matching colour on end panels and the frames in daylight is where cheap jobs show.
When a company shows before-and-after photos, ask which were done in homes like yours (same size of kitchen, same cabinet style), whether the photos are of its own jobs, and whether you can see one in person or talk to a recent customer. Ask for the contractor's licence number where your state requires one, and look at how the FTC advises hiring a contractor in the sources below: get the quote and the schedule in writing, never pay the whole price up front and read the contract before you sign.
How to pay for a cabinet project
Refacing is small enough that many people pay from savings, but a full kitchen job at the middle of the range is a real bill. Three common routes:
- The company's financing plan. Many refacing and remodel companies offer monthly payments through a lender partner. Ask whether a promotional rate is deferred interest and whether the price is the same for cash.
- An unsecured home improvement loan. Funds quickly, and pays any contractor like cash. At an illustrative 10.99% APR, a $6,000 refacing job is about $196 a month over 36 months and $1,071 in interest; a $9,000 job is about $196 a month over 60 months and $2,738 in interest.
- A home equity loan or HELOC for a larger replacement, if you have equity and no rush. A $20,000 replacement at the same illustrative rate is about $435 a month over 60 months.
Rates depend on credit and the lender, so use the numbers as a guide and not a quote. If your credit is on the lower side, start with a soft-pull pre-qualification and a smaller scope (door replacement or laminate), then see financing with bad credit for the approach. Our kitchen financing options page compares ways to pay with example payments, and the home improvement financing guide covers the other routes, including government-backed loans.
Questions to ask the refacing or replacement contractor
- What exactly is included: doors, drawer fronts, frame veneer, end panels, moulding, hardware?
- What material and finish, and can I see a sample in my own kitchen light?
- Is the price per door, per linear foot or a lump sum, and what is the unit price?
- How long will the kitchen be out of use?
- Who measures, and who pays if the doors arrive wrong?
- What warranty covers the finish and the hinges, and for how long?
- What is the price for cash or with my own lender, and what is it on your financing plan?
Questions to ask every lender
- What is the APR including fees, and is the rate fixed?
- Is there an origination fee, and is it deducted from the loan amount?
- Is any promotional period deferred interest or waived interest?
- Is there a prepayment penalty?
- When is the contractor paid, and when does my first payment start?
- Does checking my options use a soft or hard credit inquiry?
Check your inbox
Thank you for visiting AL Elite Financing. We've emailed the worksheet to . You can also download it now:
Download the PDFDidn't get the email? Check spam, or use the download button above.
Frequently asked questions
How much does cabinet refacing cost?
Cost guides range from about $900 to $6,000 for small jobs (averaging about $2,100) to $5,000 to $13,000 for an average kitchen and $9,000 to $22,000 or more for large kitchens or solid wood. Scope and material explain most of the gap.
What does cabinet refacing cost per door?
About $220 per door installed on average in one national guide. Door size, style and material change the figure, and many companies quote per linear foot for whole kitchens instead.
Is cabinet refacing cheaper than replacing?
Usually, yes. Replacing averages about $6,400 against about $2,100 for refacing in one guide, and refacing semi-custom or custom cabinets typically costs 30% to 50% less than replacing them. The cheapest replacement costs about the same as an average refacing job.
When should I replace cabinets instead of refacing them?
Replace when the boxes are damaged, moldy, crooked or have sticking drawers, when you want a new layout, or when refacing would cost more than about half the price of replacement.
What is cabinet refacing?
A way to update cabinets by keeping the boxes and replacing the doors and drawer fronts and covering the visible frame surfaces with new veneer, laminate or thermofoil, plus new hardware.
Can I reface cabinets myself?
Yes, with peel-and-stick or glued veneer and made-to-order doors. It saves labor, but measuring errors, poor surface preparation and uneven door alignment are the common failures, so it suits small rooms better than a main kitchen.
How long does cabinet refacing take?
It is usually measured in days rather than weeks, and the kitchen generally stays usable for much of the job. Ask the contractor for the schedule in writing, including the lead time for made-to-order doors.
Can I finance cabinet refacing?
Yes. Many companies offer financing, and unsecured home improvement loans or home equity products also work. Compare the APR after any promotional period and the cash price before you sign.
Sources and further reading
Primary sources we rely on for this page. Program rules change, so check the source before you rely on a figure.
